Teraflex Jeep Wrangler JK 3534410 Tera30 HD Front Axle Housing 4.10 R&P & ARB Locker Kit, Includes Front Axle Shaft Kit & High Performance Front Axle Tube Seal

Teraflex TERA30 Front Axle Kit for Jeep Wrangler JK/JKU

Whats Included:

Jeep Wrangler JK/JKU & Rubion U-Joint
DANA 30 Front Axle
Lift: 4-6"
Spicer ring & pinion - 4.10
Driver Side Length: 18.8"
Passenger Side Length: 34.5"
Axle tubes w/ 1/4" wall

Teraflex 3534410 JK: Tera30 HD Front Axle Housing w/ 4.10 R&P & ARB Locker (4-6" Lift)

TeraFlex JK Front Tera30 Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as OEM Rubicon locker, Spicer ring & pinion gear ratio, Spicer bearings and install kits, TeraFlex heavy-duty ball joints, and factory yoke.

Simply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housings a true DIY process!

TeraFlex heavy-duty JK Front Tera30 Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler and Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK Wrangler owners looking to beef up the front axle's weak areas.

  • Includes ARB Air Locker
  • Spicer bearings & install kits
  • TeraFlex HD ball joints
  • Factory Yoke

    Teraflex 3303000 Tera30 Front Axle Shaft Kit w/ Outer Stub & Rubicon U-Joint - 27-Spline

    Replace your weak stock front axle shafts with a set of heavy-duty TeraFlex Axle Shafts! These axle shafts are constructed from high-strength dual-heat treated 4340 chromoly steel and have been profiled for optimal strength. Other features include rolled splines and compatibility with the larger Dana 1350-series U-joint.
  • Front inner driver side axle shaft w/ outer stub
  • Front inner passenger side axle shaft w/ outer stub
  • Rubicon U-joint - pair

    Teraflex 4354025 Tera30/44 High-Performance Front Axle Tube Seal - 0.25" Wall

    The TeraFlex JK/JKU High Performance Tera30/44 Front Axle Tube Seal fits the oversized 3.25" O.D. axle tubes found on Tera30 and Tera44 TeraFlex JK/JKU replacement housing.

    The press-in outer triple O-ring tube seal provides a barrier to keep the housing clear of contaminants such as mud and water. The inner double axle seal surface features a cavity between the seal surfaces to form a grease filled pocket that provides lubrication for the seals as well as an additional barrier for mud and grime. These are the same seals developed, proven, and currently used in many NASCAR applications.

    The axle tube seal is compatible with all available Rubicon and non-Rubicon axle shafts, including 27-spline Dana 30 up to aftermarket 1.5" 35-spline Dana 44 shafts. The billet 6061-T6 aluminum seal housing is laser etched with graphics and black hard anodized for superior corrosion resistance.

    Feature and Benefits of this Kit!
  • 3.25" O.D. x 0.25" wall axle tube increases strength to resist bending & torsion w/ minimal weight increase
  • Pre-installed inner axle seals
  • Forged HD inner knuckles w/ greater upper & lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Asymmetric housing design, for extra-long tube side strength
  • Smooth radius bottom design to glide over rocks & obstacles
  • Integrated lower flexarm skid plates
  • Bottom oil drain hole for simple fluid changes
  • Premium UV protected triple-stage powder coat process for superior corrosion resistance
  • 1/4"-thick CNC laser cut axle brackets for extreme strength
  • Integrated factory location upper control arm mount
  • Pre-installed upper control arm bushings
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • Proper pinion angle for lifted JK applications
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps & lower spring retainers
  • Retains all JK ESP, ABS, & speedometer sensor capability
  • 100% engineered, designed, & built in the USA
  • 100% new components
  • 1-Year / Unlimited Mileage Warranty
  • Write a review.

    Note: HTML is not translated.
        Bad           Good

    Teraflex Jeep Wrangler JK 3534410 Tera30 HD Front Axle Housing 4.10 R&P & ARB Locker Kit, Includes Front Axle Shaft Kit & High Performance Front Axle Tube Seal

    Vehicle Fitment

    Fitment: Unknown

    Product Information

    • Brand: Teraflex
    • Product Number: 3534410/3303000/4354025
    • Availability: Usually Ships In a Few Days
    • $5,285.97

    404 Not Found

    Not Found

    The requested document was not found on this server.

    Web Server at theaamgroup.com

    Tags: Teraflex, 3534410, 3303000, 4354025, TERA30 Front Axle, Axle Shaft, Front Wall Tube Seal